From: Vazman@aol.com
Date: Tue Feb 01 2005 - 18:10:09 GMT-3
In the newer IOS, lmi type is auto-detected from the frame-relay switch. The default is cisco, but the FR switch could be set for something else. You can simply do a "show frame-relay lmi" to see what is being used.
R1#sh fram lmi
LMI Statistics for interface Serial0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 2 Num Status msgs Rcvd 3
Num Update Status Rcvd 0 Num Status Timeouts 0
R1#
HTH
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:15 GMT-3