From: Ralph (Mandela@myrealbox.com)
Date: Sat Jan 15 2005 - 23:04:54 GMT-3
Hey Guys:
I configured a vlan (vlan 20) as the management vlan on my 3550 switch. This vlan was assigned an IP address. I enabled IP routing and run an IGP (rip v2) on the switch, the problem is, I am not seeing this vlan subnet on the route table. My guess is it should appear as a directly connected network. Am I missing something in my config?
int vlan 20
ip add 20.20.10.3 255.255.255.0
router rip
version 2
network 20.0.0.0
no auto-summary.
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:23 GMT-3