From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Sat Jan 15 2005 - 23:13:06 GMT-3
Is your VLAN UP/UP? Can you ping 20.20.10.3?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ralph
Sent: Saturday, January 15, 2005 6:05 PM
To: ccielab@groupstudy.com
Subject: Catalyst 3550: Missing VLAN subnet
Hey Guys:
I configured a vlan (vlan 20) as the management vlan on my 3550 switch. This
vlan was assigned an IP address. I enabled IP routing and run an IGP (rip
v2) on the switch, the problem is, I am not seeing this vlan subnet on the
route table. My guess is it should appear as a directly connected network.
Am I missing something in my config?
int vlan 20
ip add 20.20.10.3 255.255.255.0
router rip
version 2
network 20.0.0.0
no auto-summary.
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:23 GMT-3