From: Georg Pauwen (pauwen@hotmail.com)
Date: Sun Dec 05 2004 - 10:46:05 GMT-3
Hello,
according to the command reference, these are the defaults:
The default settings are as follows:
Port security is disabled.
When port security is enabled and no keywords are entered, the default
maximum number of secure MAC addresses is 1.
Aging is disabled.
Aging time is 0 minutes.
All secure addresses on this port age out immediately after they are
removed from the secure address list.
Regards,
Georg
>From: "trung zazu" <trung@vnsystem.net>
>Reply-To: "trung zazu" <trung@vnsystem.net>
>To: <ccielab@groupstudy.com>
>Subject: Port-security aging time feature
>Date: Sun, 5 Dec 2004 00:15:03 +0700
>
>Hi group,
>
>For port-security aging time feature, there're 2 types of aging are
>supported:
>
>1- Absolute
>2- Inactivity.
>
>In the example below, the aging time is set to 2 hours for the secure
>addresses on the Fast Ethernet interface 0/1:
>
>Switch(config)# interface fastethernet0/1
>Switch(config-if)# switchport port-security aging time 120
>
>So if we don't specify aging type, what is the default enabled in this
>case.
>Thanks.
>
>Trung@
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:24 GMT-3