From: Swaroop Potdar (swarooppotdar@hotmail.com)
Date: Sun Dec 05 2004 - 10:29:46 GMT-3
Hi,
In which state is OSPF getting stuck.
Whats the output of show ip ospf nei or sh ip ospf int look like.
'' Try removing the neighbour statement from R4.
>From: "R. Adjakou/Home" <radjakou@cfao.sn>
>Reply-To: "R. Adjakou/Home" <radjakou@cfao.sn>
>To: "Swaroop Potdar" <swarooppotdar@hotmail.com>, <ccielab@groupstudy.com>
>Subject: Re: OSPF over CRB
>Date: Sun, 5 Dec 2004 10:36:13 -0000
>
>R4----------------------------------------------
>ip cef
>!
>interface Ethernet0
>ip address 160.44.4.4 255.255.255.0
>no keepalive
>!
>interface Serial0
>ip address 160.12.1.2 255.255.0.0
>ip directed-broadcast
>ip ospf network non-broadcast
>ip ospf priority 255
>ip ospf mtu-ignore
>fair-queue
>clock rate 125000
>!
>router ospf 1
>log-adjacency-changes
>network 160.12.0.0 0.0.255.255 area 0
>network 160.44.4.0 0.0.0.255 area 4
>neighbor 160.12.12.1
>!
>router rip
>version 1
>network 160.12.0.0
>network 160.44.0.0
>!
>ip classless
>
>R1----------------------------------------------------------------
>ip subnet-zero
>!
>ip cef
>!
>interface Ethernet0
>ip address 160.12.12.1 255.255.0.0
>ip directed-broadcast
>ip ospf network non-broadcast
>ip ospf mtu-ignore
>!
>router ospf 1
>log-adjacency-changes
>network 160.12.0.0 0.0.255.255 area 0
>neighbor 160.12.1.2
>!
>router rip
>version 1
>network 160.12.0.0
>!
>ip classless
>
>R2------------------------------------------------------
>ip cef
>!
>bridge crb
>!
>interface Ethernet0
>no ip address
>ip directed-broadcast
>bridge-group 1
>!
>interface Serial0
>no ip address
>ip directed-broadcast
>fair-queue
>bridge-group 1
>!
>ip classless
>ip pim bidir-enable
>!
>!
>bridge 1 protocol ieee
>
>
>----- Original Message ----- From: "Swaroop Potdar"
><swarooppotdar@hotmail.com>
>To: <radjakou@cfao.sn>; <ccielab@groupstudy.com>
>Sent: Saturday, December 04, 2004 7:14 PM
>Subject: RE: OSPF over CRB
>
>
>>What does your config look like...
>>
>>can u paste it here..
>>
>>>From: "Roberto Adjakou" <radjakou@cfao.sn>
>>>Reply-To: "Roberto Adjakou" <radjakou@cfao.sn>
>>>To: <ccielab@groupstudy.com>
>>>Subject: OSPF over CRB
>>>Date: Sat, 4 Dec 2004 17:48:09 -0000
>>>
>>>Dear Group,
>>>Why can't I get OSPF work between R1 and R4?
>>>
>>>
>>>R1-(e0)--------------------- (e0)-R2-(s0)------------------(s0)-R4
>>>
>>>I configure CRB on R2 and e0 and s0 are on the bridge group.
>>>R1 can ping R4's s0 and R4 can ping R1's e0.
>>>
>>>Cordialement/Best regards;
>>>-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
>>>Roberto Adjakou
>>>E-mail : RAdjakou@cfao.sn
>>>-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
>>>
>>>_______________________________________________________________________
>>>Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>Regards,
>>Swaroop.
>>------------------------------------------------------------------
>>Life Is Short & Sweet.
>>Live It To The Fullest.
>>------------------------------------------------------------------
>>
>>_________________________________________________________________
>>VeriProfile. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?74 Now
>>verify your partner's profile on BharatMatrimony.com
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
Regards,
Swaroop.
------------------------------------------------------------------
Life Is Short & Sweet.
Live It To The Fullest.
------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:24 GMT-3