Re: Port-security aging time feature

From: TN Cyclist (tncyclist02@yahoo.com)
Date: Sun Dec 05 2004 - 13:53:57 GMT-3

• Next message: Peter Ding: "RE: HSRP, NAT, & the "no ip redirect" command"
• Previous message: ccie2be: "Re: Face-Off - Dolye vs Deal on NAT"
• Maybe in reply to: trung zazu: "Port-security aging time feature"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

If the CLI will tell you in the case.
 
SW1(config-if)#switchport port-security aging type ?
  absolute Absolute aging (default)
  inactivity Aging based on inactivity time period

trung zazu <trung@vnsystem.net> wrote:
Hi group,

For port-security aging time feature, there're 2 types of aging are
supported:

1- Absolute
2- Inactivity.

In the example below, the aging time is set to 2 hours for the secure
addresses on the Fast Ethernet interface 0/1:

Switch(config)# interface fastethernet0/1
Switch(config-if)# switchport port-security aging time 120

So if we don't specify aging type, what is the default enabled in this case.
Thanks.

Trung@

• Next message: Peter Ding: "RE: HSRP, NAT, & the "no ip redirect" command"
• Previous message: ccie2be: "Re: Face-Off - Dolye vs Deal on NAT"
• Maybe in reply to: trung zazu: "Port-security aging time feature"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:24 GMT-3