From: Zafar Khan (mahaguru@gmail.com)
Date: Tue Nov 30 2004 - 02:20:07 GMT-3
Another Cisco initiative ;intended towards securing networks currently
refer to as "Network Admission Control".
www.cisco.com/application/pdf/en/us/
guest/netsol/ns466/c654/cdccont_0900aecd800fdd7b.pdf
HTH
Zafar
On Tue, 30 Nov 2004 11:33:56 +0700, Edi Guntoro
<eguntoro@sisindosat.co.id> wrote:
> HI all,
> Any bodyknow how to remove this acl, this is new router and when I do sh
> run there is no such acl configuration, when I do sh access-lists it
> appear like below. I have try to remove by "no ip access-list extended
> sl_def_acl" but the acl still there.
> Your suggestion plz ,
>
> Thanks
>
> RTRCEBSM01#sh access-lists
> Extended IP access list sl_def_acl
> 10 deny tcp any any eq telnet log
> 20 deny tcp any any eq www log
> 30 deny tcp any any eq 22 log
> 40 permit ip any any log
>
> RTRCEBSM01#sh ver
> Cisco IOS Software, 7200 Software (C7200-JK9O3S-M), Version 12.3(4)T,
> RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by Cisco Systems, Inc.
> Compiled Sat 25-Oct-03 09:17 by ccai
>
> ROM: System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1)
> BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(15)B, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
>
> RTRCEBSM01 uptime is 9 hours, 33 minutes
> System returned to ROM by power-on
> System image file is "disk2:c7200-jk9o3s-mz.123-4.T.bin"
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be
> found at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export@cisco.com.
>
> Cisco 7206VXR (NPE-G1) processor (revision A) with 983040K/65536K bytes
> of memory.
> Processor board ID 30470172
> SB-1 CPU at 700Mhz, Implementation 1, Rev 0.2, 512KB L2 Cache
> 6 slot VXR midplane, Version 2.7
>
> Last reset from power-on
>
> PCI bus mb1 has 0 bandwidth points
> PCI bus mb2 has 0 bandwidth points
>
> 3 Gigabit Ethernet interfaces
> 509K bytes of NVRAM.
>
> 251904K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
> 16384K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x2102
>
> RTRCEBSM01#sh access
> RTRCEBSM01#sh access-li
> RTRCEBSM01#sh access-lists
> Extended IP access list sl_def_acl
> 10 deny tcp any any eq telnet log
> 20 deny tcp any any eq www log
> 30 deny tcp any any eq 22 log
> 40 permit ip any any log
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:51 GMT-3