From: Edi Guntoro (eguntoro@sisindosat.co.id)
Date: Tue Nov 30 2004 - 01:33:56 GMT-3
HI all,
Any bodyknow how to remove this acl, this is new router and when I do sh
run there is no such acl configuration, when I do sh access-lists it
appear like below. I have try to remove by "no ip access-list extended
sl_def_acl" but the acl still there.
Your suggestion plz ,
Thanks
RTRCEBSM01#sh access-lists
Extended IP access list sl_def_acl
10 deny tcp any any eq telnet log
20 deny tcp any any eq www log
30 deny tcp any any eq 22 log
40 permit ip any any log
RTRCEBSM01#sh ver
Cisco IOS Software, 7200 Software (C7200-JK9O3S-M), Version 12.3(4)T,
RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by Cisco Systems, Inc.
Compiled Sat 25-Oct-03 09:17 by ccai
ROM: System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(15)B, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
RTRCEBSM01 uptime is 9 hours, 33 minutes
System returned to ROM by power-on
System image file is "disk2:c7200-jk9o3s-mz.123-4.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be
found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 7206VXR (NPE-G1) processor (revision A) with 983040K/65536K bytes
of memory.
Processor board ID 30470172
SB-1 CPU at 700Mhz, Implementation 1, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.7
Last reset from power-on
PCI bus mb1 has 0 bandwidth points
PCI bus mb2 has 0 bandwidth points
3 Gigabit Ethernet interfaces
509K bytes of NVRAM.
251904K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
RTRCEBSM01#sh access
RTRCEBSM01#sh access-li
RTRCEBSM01#sh access-lists
Extended IP access list sl_def_acl
10 deny tcp any any eq telnet log
20 deny tcp any any eq www log
30 deny tcp any any eq 22 log
40 permit ip any any log
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:51 GMT-3