From: Rohan Grover (rohang@cisco.com)
Date: Mon Nov 29 2004 - 11:33:21 GMT-3
Hi Richard,
The configs that you've shown are for cisco's internal data generator.. Any router with a special IOS image (tgn) image can act as a
data generator and create data streams.
So you see the l2-src-addr and l2-dest-addr etc. As far as I know it is available only for testing purposes and not sold
commercially.
Thanks
Rohan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Richard Dumoulin
Sent: Monday, November 29, 2004 7:51 PM
To: istong@stong.org; ccielab@groupstudy.com
Subject: RE : Cisco router generating traffic
Ian,
My question concerns the existence of documentation regarding the following
commands:
add icmp
l3-src-addr 10.0.227.2
l3-dest-addr 10.0.210.5
l2-src-addr 0004.9b85.3400
l2-dest-addr 0050.7327.3000
rate 1750
data-length 10
I have never seen this before, only in the link I provided.
-- Richard
-----Message d'origine-----
De : istong@stong.org [mailto:istong@stong.org]
Envoyi : Monday, November 29, 2004 2:53 PM
@ : Richard Dumoulin; ccielab@groupstudy.com
Objet : Re: Cisco router generating traffic
Hi Richard,
Not sure that I follow what you are looking for since the
link and info you presented is for SLA type monitoring using ICMP and/or UDP to measure latency. Typically used for SLA monitoring
purposes. The application is built into the IOS directly and allows you to measure the latency over your links.
As to your question regarding some links on configuration examples for setting up Cisco SAA, here is a pdf that should help.
www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t5
/saaoper.pdf
Thanks,
Ian
www.ccie4u.com
CCIE Lab Rack Rentals and Lab Scenarios starting at only $20
> I believe the below config found here
>
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_white_paper0900aecd
> 8017530d.shtml
> <http://www.cisco.com/en/US/tech/tk648/tk362/technologies_
> white_paper0900aec d8017530d.shtml>
> Is for generating traffic.
>
> fastethernet 0/0
> wp9000235add icmp
> wp9000236l3-src-addr 10.0.227.2
> wp9000237l3-dest-addr 10.0.210.5
> wp9000238l2-src-addr 0004.9b85.3400
> wp9000239l2-dest-addr 0050.7327.3000
> wp9000240rate 1750
> wp9000241data-length 10
> wp9000243start
>
> Anyone knows where it is documented ?
> Thanks
> -- Richard
>
>
> **********************************************************
> ************ Any opinions expressed in the email are those
> of the individual and not necessarily the company. This
> email and any files transmitted with it are confidential
> and solely for the use of the intended recipient. If you
> are not the intended recipient or th e person responsible
> for delivering it to the intended recipient, be advised
> that you have received this email in error and that any dissemination,
> distribution, copying or use is strictly prohibited.
>
> If you have received this email in error, or if you are concerned with
> the content of this email please e-mail to:
> e-security.support@vanco.info
>
> The contents of an attachment to this e-mail may contain software
> viruses which could damage your own computer system. While the sender
> has taken every reasonable precaution to minimise this risk, we cannot
> accept liability for any damage which you sust ain as a result of
> software viruses. You should carry out your own virus
> checks before opening any attachments to this e-mail.
> **********************************************************
> ************
>
> __________________________________________________________
> _____________ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
______________________________________________
Check Your Email From Any Where in the World!
Tell Your Friends about MyEmail.com! ______________________________________________
**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files
transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the
person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any
dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the content of this email please e-mail to:
e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the
sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a
result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:51 GMT-3