From: Ivan Ostre¹ (ivan.ostres@snt.hr)
Date: Mon Nov 15 2004 - 10:01:11 GMT-3
Well,
I personaly would not change config-reg if not needed (notepad seems better in
this situation). My idea is to touch just what I have to... We'll see how good
is it at december 3rd :-|
Ivan
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Monday, November 15, 2004 12:59 PM
To: Ivan Ostre9
Cc: ccielab@groupstudy.com
Subject: Re: DHCP config on an HSRP segment
Oh. In that case, I don't like that idea so much.
Wouldn't it be much faster to copy the old (existing) to notepad, use the
command (something like) default interface e x/x, config dhcp client on
interface, make sure that dhcp works, and then copy the interface config back
from notepad?
No, reboot needed this way.
The idea of changing the config registers during the lab seems to be too
risky. Suppose a mistake is made at that point? It could take a while to fix
that, don't you think?
Thanks for the clarification, though.
----- Original Message -----
From: "Ivan Ostre9" <ivan.ostres@snt.hr>
To: "ccie2be" <ccie2be@nyc.rr.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, November 15, 2004 3:38 AM
Subject: RE: DHCP config on an HSRP segment
Hi Tim,
I think that David meant to change config register to avoid startup-config
becoming running-config. So, you change the register, reload the router and
you have a clean situation while your old config is still in the
startup-config. After playing with an option that you wanted to test, just
change the register, reload and your old config is back (so you don't need
to make backup of your original config).
HTH,
Ivan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Friday, November 12, 2004 8:09 PM
To: David Buechner; Mark H. Turpin; Group Study
Subject: Re: DHCP config on an HSRP segment
Hey David,
Thanks alot for your response.
Both of your ideas sound excellent so I'm gonna try them out and see which
one works best for me. .
But, I have to admit I don't know how to change the register to make the
router look like a client. Actually, I don't recall ever hearing of that
being done. I know how to change the register, for example, to do a
password recovery but can you explain how to make the router "appear" like a
client or point me to a link that explains that?
Also, when you say make the router look like a client, you mean a dhcp
client, right?
And, when the register is changed, how does the router behave as compared to
when just the interface is made a dhcp client?
Thanks again, Tim
[GroupStudy removed an attachment of type application/ms-tnef which had a name of winmail.dat]
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:45 GMT-3