From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu Nov 11 2004 - 17:02:50 GMT-3
Hi guys,
Here's the scenario:
rtr-A rtr-B
|-------------------------|
^
vlan 10
I have an HSRP segment where rtr-A and rtr-B are the hsrp routers. In
addition, dhcp is configured on rtr-A to provide addresses to hosts on vlan
10, when I configure dhcp, what addresses must be excluded from the dhcp pool
so that the maximum number of addresses are available to lease to dhcp
clients?
DHCP is configured so that hosts on vlan 10 are told their default router is
the virtual ip address created by hsrp.
rtr-A's physcial ip address is 1.1.1.1/24
rtr-B's physical ip address is 1.1.1.11/24
hsrp virtual ip address is 1.1.1.23/24
Also, in the real lab where there aren't any actual hosts on the segment, what
should be done to verify the dhcp configuartion to make sure the config is
correct?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:42 GMT-3