Re: voice Vlan

From: reo@chavallos.net
Date: Tue Nov 02 2004 - 12:50:42 GMT-3

• Next message: nettable_walker: "Re: Point to Point async connections"
• Previous message: Cisco Net: "Re: voice Vlan"
• Maybe in reply to: Ahmed Hassan: "voice Vlan"
• Next in thread: Brian McGahan: "RE: voice Vlan"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Here's an example

---
interface GigabitEthernet1/2
 no ip address
 switchport
 switchport access vlan 30
 switchport mode access
 switchport voice vlan 130
---
----- Original Message ----- 
From: "Ahmed Hassan" <ahmed_hassan@rayatelecom.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, November 02, 2004 1:01 AM
Subject: voice Vlan
> HI,
> When we configure a port with the command
> Switchport voice Vlan 20
> 
> How we configure the data VLAN on the same port
> 
> Switchport access vlan 10
> 
> Or 
> 
> Switchport native vlan 10
> 
> Or Both 
> Switchport access vlan 10
> Switchport native vlan 10
> 
> Best Regards
> Ahmed Hassan 
> Product Development Supervisor
> Raya Telecom         
> 
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html

• Next message: nettable_walker: "Re: Point to Point async connections"
• Previous message: Cisco Net: "Re: voice Vlan"
• Maybe in reply to: Ahmed Hassan: "voice Vlan"
• Next in thread: Brian McGahan: "RE: voice Vlan"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:37 GMT-3