From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Nov 02 2004 - 13:28:35 GMT-3
You cannot issue the "switchport mode access" command on the
interface otherwise trunking negotiation cannot occur.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> reo@chavallos.net
> Sent: Tuesday, November 02, 2004 9:51 AM
> To: ccielab@groupstudy.com
> Subject: Re: voice Vlan
>
> Here's an example
>
> ---
> interface GigabitEthernet1/2
> no ip address
> switchport
> switchport access vlan 30
> switchport mode access
> switchport voice vlan 130
> ---
>
> ----- Original Message -----
> From: "Ahmed Hassan" <ahmed_hassan@rayatelecom.net>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, November 02, 2004 1:01 AM
> Subject: voice Vlan
>
>
> > HI,
> > When we configure a port with the command
> > Switchport voice Vlan 20
> >
> > How we configure the data VLAN on the same port
> >
> > Switchport access vlan 10
> >
> > Or
> >
> > Switchport native vlan 10
> >
> > Or Both
> > Switchport access vlan 10
> > Switchport native vlan 10
> >
> > Best Regards
> > Ahmed Hassan
> > Product Development Supervisor
> > Raya Telecom
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:37 GMT-3