From: Matt M (mmaslo@optonline.net)
Date: Tue Oct 19 2004 - 20:05:49 GMT-3
It looks like your pings are timing out.....did u try extended ping with
150.3.6.6 as your source address?
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Tuesday, October 19, 2004 11:39 AM
Subject: rtr or SAA
> Hi guys,
>
> I've config'd rtr on R6 to ping 115.0.0.1 every 30 seconds. As you can see
> from the output below pings are successful and they take a max of 4ms.
>
> However, in the output of the show rtr collections stats, there are no
> successful "operations". Why is that?
>
> Rack1R6#p 115.0.0.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 115.0.0.1, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
> Rack1R6#sh rtr collection-statistics
> Entry number: 1
> Start Time Index: *11:35:07.228 UTC Tue Oct 19 2004
> Number of successful operations: 0
> Number of operations over threshold: 0
> Number of failed operations due to a Disconnect: 0
> Number of failed operations due to a Timeout: 10
> Number of failed operations due to a Busy: 0
> Number of failed operations due to a No Connection: 0
> Number of failed operations due to an Internal Error: 0
> Number of failed operations due to a Sequence Error: 0
> Number of failed operations due to a Verify Error: 0
> RTT Values:
> RTTAvg: 0 RTTMin: 0 RTTMax: 0
> NumOfRTT: 0 RTTSum: 0 RTTSum2: 0
>
> HEre's the rtr config:
>
> rtr 1
> type echo protocol ipIcmpEcho 115.0.0.1 source-ipaddr 150.3.6.6
> request-data-size 1250
> timeout 25
> frequency 30
> rtr schedule 1 start-time now
>
> Am I missing something very basic?
>
> Thanks, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:50 GMT-3