From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Oct 19 2004 - 12:39:29 GMT-3
Hi guys,
I've config'd rtr on R6 to ping 115.0.0.1 every 30 seconds. As you can see
from the output below pings are successful and they take a max of 4ms.
However, in the output of the show rtr collections stats, there are no
successful "operations". Why is that?
Rack1R6#p 115.0.0.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 115.0.0.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Rack1R6#sh rtr collection-statistics
Entry number: 1
Start Time Index: *11:35:07.228 UTC Tue Oct 19 2004
Number of successful operations: 0
Number of operations over threshold: 0
Number of failed operations due to a Disconnect: 0
Number of failed operations due to a Timeout: 10
Number of failed operations due to a Busy: 0
Number of failed operations due to a No Connection: 0
Number of failed operations due to an Internal Error: 0
Number of failed operations due to a Sequence Error: 0
Number of failed operations due to a Verify Error: 0
RTT Values:
RTTAvg: 0 RTTMin: 0 RTTMax: 0
NumOfRTT: 0 RTTSum: 0 RTTSum2: 0
HEre's the rtr config:
rtr 1
type echo protocol ipIcmpEcho 115.0.0.1 source-ipaddr 150.3.6.6
request-data-size 1250
timeout 25
frequency 30
rtr schedule 1 start-time now
Am I missing something very basic?
Thanks, Tim
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:49 GMT-3