From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Oct 19 2004 - 12:44:45 GMT-3
Hi,
This morning I had read this post and the others in this thread. Then,
while doing a practice lab, I came along a similar requirement and reread
all these posts looking for a definative answer.
Then it occured to me that - at least in the practice lab I was doing, the X
didn't mean any number. It meant "use the rack number you're working on".
I donno if this situation is applicable to the problem you're working on,
but thought I would just point this out.
HTH, Tim
----- Original Message -----
From: "Cisco Net" <network.cisco@gmail.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Tuesday, October 19, 2004 12:30 AM
Subject: Access-list clarification
> Hi
> How to write an acl for the following,
> 145.X.0.0 /16 where as second octet can be any number
>
> Got confused..
>
> 145.0.0.0 0.255.255.255 will not match the mask.
>
> Is it,
>
> 145.0.0.0 0.255.255.255 host 255.255.0.0 ???
>
> Please clarify....
> Regards
> Cert
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:49 GMT-3