From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Oct 19 2004 - 18:17:37 GMT-3
Christian,
If the VTP domain is converged, all devices should have the same
revision number. When a server makes a change, it increments its
revision number and propagates the new changes. When the domain
re-converges, all devices will have this new higher revision number.
There is no special configuration for this setup, it will happen
automatically.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: Cristian Henry H [mailto:chenry@reuna.cl]
> Sent: Tuesday, October 19, 2004 4:16 PM
> To: Brian McGahan
> Cc: ccielab@groupstudy.com
> Subject: Re: VTP server backup
>
> Any problem with the configuration revision number?, what is the rule
> about that to keep this double vtp server scenario working well?. What
> would I do to add/remove/modify any VLAN in the domain?
>
> Thanks
>
> Brian McGahan ha escrito:
> >
> > Christian,
> >
> > Yes, simply configure another VTP server in the network.
> > However, if there is only one server and it fails, this does not
> > invalidate the information in the VTP database. It simply prevents
> > changes being made to the domain unless another device is configured
in
> > server mode.
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
Behalf
> > Of
> > > Cristian Henry H
> > > Sent: Tuesday, October 19, 2004 3:58 PM
> > > Cc: ccielab@groupstudy.com
> > > Subject: VTP server backup
> > >
> > > Hi guys,
> > >
> > > Are there any way to config a VTP server backup scenario?. I mean,
if
> > a
> > > vtp server switch goes down then automatcally another switch can
> > operate
> > > as the VTP server for the vtp domain.
> > >
> > > Thanks
> > >
> > > --
> > > Cristian E. Henry
> > > REUNA
> > >
> > > E-mail: chenry@reuna.cl
> > > Fono: 56-2-3370336
> > >
> > >
> >
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:50 GMT-3