From: marvin greenlee (marvin@ccbootcamp.com)
Date: Tue Sep 21 2004 - 13:22:37 GMT-3
With some of the more recent 3550 software images, you can also use the
command "show vtp password".
- Marvin Greenlee, CCIE#12237
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Andrew Whitaker
Sent: Tuesday, September 21, 2004 7:18 AM
To: IMAM; ccielab@groupstudy.com
Subject: RE: problem VLAN [bcc][faked-from]
Importance: Low
If you're using domains and passwords, make sure they match with your show
vtp status output. The names and passwords are case sensitive, and a space
after a password is considered part of the password. (Note that you will
have to compare the hashes in the output to verify consistent passwords)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Oliver Grenham
Sent: Tuesday, September 21, 2004 9:05 AM
To: IMAM; ccielab@groupstudy.com
Subject: Re: problem VLAN
Hi Imam,
do a show vtp status on both switches and check the revision number for the
VTP database. If for some reason you client has a higher revision number it
may not accept the update from the server. Otherwise check passwords and
domain names etc (though Im sure you alrady have)
Ollie.
----- Original Message -----
From: "IMAM" <imam@intikom.co.id>
To: <ccielab@groupstudy.com>
Sent: Tuesday, September 21, 2004 8:35 PM
Subject: problem VLAN
> Dear groups
>
> I got problem in my lab I have scenario very simple, between cat 3750
> and 3350 I have created trunking.also I have configure VTP domain,VTP
> mode ( one client and other one server) . unfortunately when I had
> created vlan on VTP server ( such as in cat 3750 ) the database vlan
> can not update in other switch ( 3550 ) . do any suggestion regarding this
> matter ???
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:47 GMT-3