From: wei zhu (zhuwei1231@yahoo.ca)
Date: Thu Sep 16 2004 - 12:54:04 GMT-3
Ozgur, thanks a lot for the clue. Local PBR only can
handle voice signal data, but voice-class help to
setup PBR on Loopback interface for the voice data.
This link is the solution.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/vclcef.htm#75912
Regards
Wei
--- OzgurG@garanti.com.tr wrote:
> What you can do is route the packets to a loopback
> address on the router
> itself,
> than do policy routing on the loopback.
> HTH
>
> Ozgur #13237
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> James
> Sent: 16 September 2004 05:17
> To: Wei Zhu
> Cc: ccielab@groupstudy.com
> Subject: Re: policy routing local generated voice
> traffic?
>
> On Wed, Sep 15, 2004 at 08:52:18PM -0400, Wei Zhu
> wrote:
> > Using ip policy route-map doesn't policy route
> local generated voice
> > traffic, although it is tested good for local
> generated telnet
> traffic. Any comment?
>
> Not sure if this may work, but have tried doing 'ip
> local policy <etc>'
> ?
>
> HTH,
> -J
>
>
> --
> James Jun
> TowardEX
> Technologies, Inc.
> Technical Lead Network
> Design, Consulting, IT
> Outsourcing
> james@towardex.com Boston-based
> Colocation & Bandwidth
> Services
> cell: 1(978)-394-2867 web:
> http://www.towardex.com , noc:
> www.twdx.net
>
>
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:45 GMT-3