Using Tunnels with iBGP

From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Aug 06 2004 - 09:59:48 GMT-3

Hi guys,

Here's the scenario:

R1 ----- R2 ---- R3
 | ------ tunnel --- |

R1 and R3 are running BGP and are in the same AS.

R2 is NOT running BGP & I'm not allowed to redist BGP into the IGP.

Here's the problem:

Assuming no eBGP peers have been set up at this point, how can the R1 to R3
peering session and tunnel config be verified as correct?

I assume that the output of the show ip bgp summary command will show that R1
and R3 are successfully peering whether or not the tunnel is being used.

TIA, Tim

This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:33 GMT-3