From: James (james@towardex.com)
Date: Fri Aug 06 2004 - 11:14:21 GMT-3
On Fri, Aug 06, 2004 at 09:57:29AM -0400, ccie2be wrote:
> Hey Sam,
>
> It seems like you understand the issue here, but you didn't mention how I
> can verify if packets between the peers are using the tunnel rather than
> just the IGP.
debug ip packets on the tunnel or:
Put an ACL on the physical interface that tunnel transits through:
acc 101 den tc an eq 179 an
acc 101 den tc an an eq 179
acc 101 per ip an an
Now, wait a bit, up to the maximum hold-down timer configured (Cisco default
is 180 seconds). Then...
If your bgp session is still alive, congratulations, its going over tunnel! :)
Hope this helps..
-J
-- James Jun TowardEX Technologies, Inc. Technical Lead Network Design, Consulting, IT Outsourcing james@towardex.com Boston-based Colocation & Bandwidth Services cell: 1(978)-394-2867 web: http://www.towardex.com , noc: www.twdx.net
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:34 GMT-3