From: samccie2004@yahoo.co.uk
Date: Tue Aug 17 2004 - 10:39:48 GMT-3
Not if u specify ur update source as tunnel interface and u peer with
tunnel interface on remote router.
I hope I understood ur Question correctly
Sam
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: 06 August 2004 15:00
To: Group Study; Brian McGahan
Subject: Using Tunnels with iBGP
Hi guys,
Here's the scenario:
R1 ----- R2 ---- R3
| ------ tunnel --- |
R1 and R3 are running BGP and are in the same AS.
R2 is NOT running BGP & I'm not allowed to redist BGP into the IGP.
Here's the problem:
Assuming no eBGP peers have been set up at this point, how can the R1 to
R3
peering session and tunnel config be verified as correct?
I assume that the output of the show ip bgp summary command will show
that R1
and R3 are successfully peering whether or not the tunnel is being used.
TIA, Tim
This archive was generated by hypermail 2.1.4 : Fri Sep 03 2004 - 07:02:33 GMT-3