Re: RE: Frame-relay interface Tracking

From: Patrick Torney (ptorney@satx.rr.com)
Date: Thu Jul 29 2004 - 15:02:52 GMT-3


I think changing the LMI time on the frame interface will have the same
effect... except when you do change it you won't loose your frame-relay
specific config stuff...

Router(config-if)#frame-relay lmi-type q933a
Router(config-if)#end
Router#

!Before config took effect...
Router#sh ip int brief
Interface IP-Address OK? Method Status
Protocol
...
Serial0 unassigned YES unset up
up
...
!after changed lmi type
Router#
*Mar 11 00:06:26.692: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0, changed state to down
Router#sh ip int brief
Interface IP-Address OK? Method Status
Prot
ocol
...
Serial0 unassigned YES unset up
down
...

Router#

HTH,
Pat Torney

----- Original Message -----
From: "Brian Dennis" <bdennis@internetworkexpert.com>
To: <gladston@br.ibm.com>; <ccielab@groupstudy.com>
Sent: Thursday, July 29, 2004 12:30 PM
Subject: RE: RE: Frame-relay interface Tracking

> Change the interface encapsulation:
>
> Rack1R4(config)#int s0/0
> Rack1R4(config-if)#encap ppp
> Not all config may be removed and may reappear after reactivating the
> sub-interface
> Error:Crypto EzVPN does not exist.
> Rack1R4(config-if)#
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state
> to down
>
> Change the Frame Relay interface type to DCE:
>
> Rack1R4(config)#frame-relay switching
> Rack1R4(config)#int s0/0
> Rack1R4(config-if)#fram intf-type dce
> Rack1R4(config-if)#
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state
> to down
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> gladston@br.ibm.com
> Sent: Thursday, July 29, 2004 8:10 AM
> To: ccielab@groupstudy.com
> Subject: Re: RE: Frame-relay interface Tracking
>
> Brian,
>
> Would you please give us an example? (to shutdown without goint into FR
> switch)
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:06 GMT-3