From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Jul 29 2004 - 12:30:29 GMT-3
John,
PPP Multilink is used to maximize link efficiency through
fragmentation and load distribution of packets. Both links can be
utilized without running PPP Multilink, however the efficiency will be
reduced.
I.e. dialer load-threshold is independent of PPP Multilink.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> john matijevic
> Sent: Thursday, July 29, 2004 10:18 AM
> To: 'Joseph D. Phillips'; 'ccie2be'; 'Richard Dumoulin'; 'Group Study'
> Subject: RE: Dialer load threshhold vs. ppp multilink
>
> Hello Joseph,
> Usually when you set dialer load-threshold, you want to also use ppp
> multilink, otherwise whats the point of setting the load-threshold, if
> you cant bring up the other line.
>
> Sincerely,
>
> John Matijevic, CCIE #13254, MCSE, CNE, CCEA
> Network Consultant
> Hablo Espanol
> 305-321-6232
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Joseph D. Phillips
> Sent: Thursday, July 29, 2004 11:10 AM
> To: ccie2be; Richard Dumoulin; Group Study
> Subject: Dialer load threshhold vs. ppp multilink
>
> Can someone explain what the difference is between dialer load-thresh
> and ppp multi? Are they mutually exclusive, if you have ppp configured
> anyway?
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3