From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Jul 29 2004 - 12:27:05 GMT-3
Rack12R1#show ip int brief | exclude unassigned
Interface IP-Address OK? Method Status
Protocol
Serial0/0 1.2.3.4 YES manual up up
Rack12R1#show frame-relay lmi int s0/0 | include LMI TYPE
LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE =
CISCO
Rack12R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack12R1(config)#int s0/0
Rack12R1(config-if)#frame-relay lmi-type ansi
Rack12R1(config-if)#end
Rack12R1#
%SYS-5-CONFIG_I: Configured from console by console
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state
to down
Rack12R1#show ip int brief | exclude unassigned
Interface IP-Address OK? Method Status
Protocol
Serial0/0 1.2.3.4 YES manual up down
Rack12R1#
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> gladston@br.ibm.com
> Sent: Thursday, July 29, 2004 10:10 AM
> To: ccielab@groupstudy.com
> Subject: Re: RE: Frame-relay interface Tracking
>
> Brian,
>
> Would you please give us an example? (to shutdown without goint into
FR
> switch)
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:05 GMT-3