From: Geert Nijs (geert.nijs@simac.be)
Date: Mon Jul 26 2004 - 12:18:56 GMT-3
Hi group,
Can the "preference" command be used for "backup" of an unreachable dial-peer ??
I have been playing around with the following config:
dial-peer voice 1 voip
preference 1
destination-pattern 001
session target ipv4:150.50.106.1
!
dial-peer voice 3 voip
preference 2
destination-pattern 001
session target ipv4:150.50.16.6
When i make the ip address 150.50.106.1 unavailable, my call doesn't switch to 150.50.16.6
How can i make this call switch to 150.50.16.6 if 150.50.106.1 becomes unavailable ??
Regards,
Geert Nijs
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:03 GMT-3