From: Lord, Chris (chris.lord@lorien.co.uk)
Date: Wed Jul 21 2004 - 13:00:01 GMT-3
I know this is a small point, but can anyone confirm for me how the proctors expect the dialer load-threshold values to be rounded? If you are told, for example, to bring-up the second bri channel at 50% load then mathematically this is 255/2 = 127.5. Should this be configured as 127 or 128? I think it should be 127 because technically if it were 128, the load would have to reach 50.2% before the line would come up. So I would always round-down to the next lowest number whatever the % yields.
????
Thanks,
Chris.
**********************************************************************
The information contained in this email is confidential and is intended for the recipient only. If you have received it in error, please notify us immediately by reply email and then delete it from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person or store or copy this information in any medium. The views contained in this email are those of the author and not necessarily those of Lorien plc.
Thank you for your co-operation.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:00 GMT-3