From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Thu Jul 22 2004 - 05:08:19 GMT-3
I think either would do. If they failed you for that, that would be a bit
unfair I think.
-----Original Message-----
From: Lord, Chris [mailto:chris.lord@lorien.co.uk]
Sent: 21 July 2004 17:00
To: ccielab@groupstudy.com
Subject: Dialer Threshold Values
I know this is a small point, but can anyone confirm for me how the proctors
expect the dialer load-threshold values to be rounded? If you are told, for
example, to bring-up the second bri channel at 50% load then mathematically
this is 255/2 = 127.5. Should this be configured as 127 or 128? I think it
should be 127 because technically if it were 128, the load would have to
reach 50.2% before the line would come up. So I would always round-down to
the next lowest number whatever the % yields.
????
Thanks,
Chris.
**********************************************************************
The information contained in this email is confidential and is intended for
the recipient only. If you have received it in error, please notify us
immediately by reply email and then delete it from your system. Please do
not copy it or use it for any purposes, or disclose its contents to any
other person or store or copy this information in any medium. The views
contained in this email are those of the author and not necessarily those of
Lorien plc.
Thank you for your co-operation.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:00 GMT-3