From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sun Jul 18 2004 - 16:03:41 GMT-3
Hmmm... this question sounds familiar... ;)
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> ccie2be
> Sent: Sunday, July 18, 2004 1:24 PM
> To: Group Study
> Subject: Sunday's Network Brain Quiz
>
> Hi guys,
>
> Here's an interesting challenge for all those ccie wannabe's out
there:
>
>
> There's a router in the middle of your network with 5 active
interfaces.
> It's
> running a couple of different routing protocols: eigrp and ospf.
>
> On this router a loopback interface, lo133, is configured with the
address
> 154.6.133.1/24 which is not known or advertised by any routing
protocol.
>
> On this same router, the command, ip telnet source-interface lo133, is
> configured.
>
> What additional configuration is needed so that telnet sessions
initiated
> from
> this router are successful to any other router in the network?
>
> Prove your config by showing multiple successful telnets.
>
>
> Hope you have fun with this. Tim
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:58 GMT-3