From: ccie2be (ccie2be@nyc.rr.com)
Date: Sun Jul 18 2004 - 15:23:32 GMT-3
Hi guys,
Here's an interesting challenge for all those ccie wannabe's out there:
There's a router in the middle of your network with 5 active interfaces. It's
running a couple of different routing protocols: eigrp and ospf.
On this router a loopback interface, lo133, is configured with the address
154.6.133.1/24 which is not known or advertised by any routing protocol.
On this same router, the command, ip telnet source-interface lo133, is
configured.
What additional configuration is needed so that telnet sessions initiated from
this router are successful to any other router in the network?
Prove your config by showing multiple successful telnets.
Hope you have fun with this. Tim
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:58 GMT-3