From: byme (byme88@hotmail.com)
Date: Fri Jul 16 2004 - 00:11:58 GMT-3
Hi Andy,
I am using the ATM Enhance Module (155 MM) for the 7200 series routers.
They are great modules and with 12.2 T IOS, you can meet quite a few tasks
in terms of ATM QoS. The regular ATM Module (not Enhance) for 7200 routers,
will not have some QoS features available when running on same router with
same IOS.
I am not sure what ATM modules are being used on the actual lab but my guess
is they used the 3600 or 3700 series routers for ATM backbone.
Hope that helps!
Xy
----- Original Message -----
From: "Andy Mrozek" <AndyMrozek@yahoo.com>
To: "'byme'" <byme88@hotmail.com>; <ccielab@groupstudy.com>
Sent: Thursday, July 15, 2004 4:47 PM
Subject: RE: ATM Home Lab typical Equipment ?
> Thanks Byme , I have been looking it up , looks like that is the case I
> havent found modules for 2600 . but for 3610 there are , what modules are
> you using ? I see different ones for different access rates. Are there
> different features , that can be implemented on different modules ? Wonder
> what modules are on the actual lab or say in netmaster's online racks ??
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
byme
> Sent: Thursday, July 15, 2004 7:36 PM
> To: Andy Mrozek; ccielab@groupstudy.com
> Subject: Re: ATM Home Lab typical Equipment ?
>
> Hi Andy,
>
> I am not sure the 2621 will take an ATM modules, but I think the 3600
series
> will. I used a couple of the 7206 routers with ATM interface, an LS-100
> switch and they works just fine.
> You will need an ATM switch i.e LS1010 or LS-100 to do the SVC.
> But this also could be accomplished by rent rack time just for ATM
purpose.
> (which is a lot more economize!)
>
> Cheers,
> Xy
> ----- Original Message -----
> From: "Andy Mrozek" <AndyMrozek@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, July 15, 2004 3:27 PM
> Subject: ATM Home Lab typical Equipment ?
>
>
> > Hi,
> > I was wondering of those who have home labs , what type of ATM equipment
> > they are using . Most of my routers are 2621's , and I was thinking on
> > getting ATM interfaces and an ls1010 switch. To do both pvc/svc I think
> ATM
> > switch is necessary for svc ?? Yes ?? PVC could be done with just
router
> > modules in a back to back setup ? I am not sure what ATM module for
2621
> > routers would suffice ?? Any suggestions. Thanks
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:57 GMT-3