From: Andy Mrozek (AndyMrozek@yahoo.com)
Date: Thu Jul 15 2004 - 23:47:12 GMT-3
Thanks Byme , I have been looking it up , looks like that is the case I
havent found modules for 2600 . but for 3610 there are , what modules are
you using ? I see different ones for different access rates. Are there
different features , that can be implemented on different modules ? Wonder
what modules are on the actual lab or say in netmaster's online racks ??
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of byme
Sent: Thursday, July 15, 2004 7:36 PM
To: Andy Mrozek; ccielab@groupstudy.com
Subject: Re: ATM Home Lab typical Equipment ?
Hi Andy,
I am not sure the 2621 will take an ATM modules, but I think the 3600 series
will. I used a couple of the 7206 routers with ATM interface, an LS-100
switch and they works just fine.
You will need an ATM switch i.e LS1010 or LS-100 to do the SVC.
But this also could be accomplished by rent rack time just for ATM purpose.
(which is a lot more economize!)
Cheers,
Xy
----- Original Message -----
From: "Andy Mrozek" <AndyMrozek@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, July 15, 2004 3:27 PM
Subject: ATM Home Lab typical Equipment ?
> Hi,
> I was wondering of those who have home labs , what type of ATM equipment
> they are using . Most of my routers are 2621's , and I was thinking on
> getting ATM interfaces and an ls1010 switch. To do both pvc/svc I think
ATM
> switch is necessary for svc ?? Yes ?? PVC could be done with just router
> modules in a back to back setup ? I am not sure what ATM module for 2621
> routers would suffice ?? Any suggestions. Thanks
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:57 GMT-3