From: Peng Zheng (zpnist@yahoo.com)
Date: Sun Jun 27 2004 - 14:12:47 GMT-3
Will it function differently if I use different be?
And how?
--- Geert Nijs <geert.nijs@simac.be> wrote:
> The "Byte Limit" and the "Increment" are just Bc and
> Be expressed in
> bytes, instead of bits:
>
> "Increment" = the number of bytes in ONE interval
> to reach
> CIR
> = Bc / 8
>
> "Byte Limit" = the total number of bytes allowed in
> ONE interval
> = (Bc + Be) / 8
>
> So if you configure Be to be 0 (like in your second
> example), it is
> obvious that "Byte Limit" also changes,
>
> Regards,
> Geert
>
>
> -----Oorspronkelijk bericht-----
> Van: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] Namens Peng
> Zheng
> Verzonden: zondag 27 juni 2004 7:28
> Aan: ccielab@groupstudy.com
> Onderwerp: Does "be" function in shape average?
>
>
> for shape average, it is said for be: 0 will
> be used if you don't configure it.
>
> if I use:
>
> shape average 16000 1024
>
> with show policy-map interface, I got:
>
> Traffic Shaping
> Target Byte Sustain Excess Interval Increment
> Rate Limit bits/int bits/int (ms) (bytes)
> 16000 256 1024 1024 64 128
>
> Actually, the be is same as bc.
>
> if I type:
>
> shape average 16000 1024 0,
>
> I got:
>
> Traffic Shaping
> Target Byte Sustain Excess Interval Increment
> Rate Limit bits/int bits/int (ms) (bytes)
> 16000 128 1024 0 64 128
>
> According to my understanding, be has no influence
> with shape average, but Byte Limit changes when I
> change be. What does Byte Limit mean? How does it
> function in traffic shaping?
>
>
> Thanks.
>
>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> New and Improved Yahoo! Mail - Send 10MB messages!
> http://promotions.yahoo.com/new_mail
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:51 GMT-3