From: Geert Nijs (geert.nijs@simac.be)
Date: Sun Jun 27 2004 - 14:06:11 GMT-3
The "Byte Limit" and the "Increment" are just Bc and Be expressed in
bytes, instead of bits:
"Increment" = the number of bytes in ONE interval to reach
CIR
= Bc / 8
"Byte Limit" = the total number of bytes allowed in ONE interval
= (Bc + Be) / 8
So if you configure Be to be 0 (like in your second example), it is
obvious that "Byte Limit" also changes,
Regards,
Geert
-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Peng
Zheng
Verzonden: zondag 27 juni 2004 7:28
Aan: ccielab@groupstudy.com
Onderwerp: Does "be" function in shape average?
for shape average, it is said for be: 0 will
be used if you don't configure it.
if I use:
shape average 16000 1024
with show policy-map interface, I got:
Traffic Shaping
Target Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
16000 256 1024 1024 64 128
Actually, the be is same as bc.
if I type:
shape average 16000 1024 0,
I got:
Traffic Shaping
Target Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
16000 128 1024 0 64 128
According to my understanding, be has no influence
with shape average, but Byte Limit changes when I
change be. What does Byte Limit mean? How does it
function in traffic shaping?
Thanks.
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:51 GMT-3