From: Jesse Loggins (jlogginsccie@san.rr.com)
Date: Mon Jun 21 2004 - 01:33:50 GMT-3
I know this may be a stupid question, but I can not find any info on the
difference. Could some one explain the difference between these two commands?
As they seem to do perform the same functions.
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(17a), RELEASE SOFTWARE
(fc1)
r1(config)#snmp-server ?
chassis-id String to uniquely identify this chassis
community Enable SNMP; set community string and access privs
contact Text for mib object sysContact
enable Enable SNMP Traps or Informs
engineID Configure a local or remote SNMPv3 engineID
group Define a User Security Model group
host Specify hosts to receive SNMP notifications
ifindex Enable ifindex persistence
inform Configure SNMP Informs options
location Text for mib object sysLocation
manager Modify SNMP manager parameters
packetsize Largest SNMP packet size
queue-length Message queue length for each TRAP host
system-shutdown Enable use of the SNMP reload command
tftp-server-list Limit TFTP servers used via SNMP
trap SNMP trap options
trap-source Assign an interface for the source address of all traps
trap-timeout Set timeout for TRAP message retransmissions
user Define a user who can access the SNMP engine
view Define an SNMPv2 MIB view
r1(config)#snmp ?
chassis-id String to uniquely identify this chassis
community Enable SNMP; set community string and access privs
contact Text for mib object sysContact
enable Enable SNMP Traps or Informs
engineID Configure a local or remote SNMPv3 engineID
group Define a User Security Model group
host Specify hosts to receive SNMP notifications
ifindex Enable ifindex persistence
inform Configure SNMP Informs options
location Text for mib object sysLocation
manager Modify SNMP manager parameters
packetsize Largest SNMP packet size
queue-length Message queue length for each TRAP host
system-shutdown Enable use of the SNMP reload command
tftp-server-list Limit TFTP servers used via SNMP
trap SNMP trap options
trap-source Assign an interface for the source address of all traps
trap-timeout Set timeout for TRAP message retransmissions
user Define a user who can access the SNMP engine
view Define an SNMPv2 MIB view
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:45 GMT-3