From: Jesse Loggins (jlogginsccie@san.rr.com)
Date: Mon Jun 21 2004 - 03:39:29 GMT-3
Found the answer. Seems some IOS versions will accept both versions of the
command. Newer IOS versions seem to require the snmp-server version of the
command. Older versions also seem to add the "-server" portion in the config
even if the "snmp" version of the command is used.
----- Original Message -----
From: "Jesse Loggins" <jlogginsccie@san.rr.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, June 20, 2004 9:33 PM
Subject: SNMP Commands
> I know this may be a stupid question, but I can not find any info on the
> difference. Could some one explain the difference between these two
commands?
> As they seem to do perform the same functions.
>
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(17a), RELEASE SOFTWARE
> (fc1)
>
> r1(config)#snmp-server ?
> chassis-id String to uniquely identify this chassis
> community Enable SNMP; set community string and access privs
> contact Text for mib object sysContact
> enable Enable SNMP Traps or Informs
> engineID Configure a local or remote SNMPv3 engineID
> group Define a User Security Model group
> host Specify hosts to receive SNMP notifications
> ifindex Enable ifindex persistence
> inform Configure SNMP Informs options
> location Text for mib object sysLocation
> manager Modify SNMP manager parameters
> packetsize Largest SNMP packet size
> queue-length Message queue length for each TRAP host
> system-shutdown Enable use of the SNMP reload command
> tftp-server-list Limit TFTP servers used via SNMP
> trap SNMP trap options
> trap-source Assign an interface for the source address of all
traps
> trap-timeout Set timeout for TRAP message retransmissions
> user Define a user who can access the SNMP engine
> view Define an SNMPv2 MIB view
>
> r1(config)#snmp ?
> chassis-id String to uniquely identify this chassis
> community Enable SNMP; set community string and access privs
> contact Text for mib object sysContact
> enable Enable SNMP Traps or Informs
> engineID Configure a local or remote SNMPv3 engineID
> group Define a User Security Model group
> host Specify hosts to receive SNMP notifications
> ifindex Enable ifindex persistence
> inform Configure SNMP Informs options
> location Text for mib object sysLocation
> manager Modify SNMP manager parameters
> packetsize Largest SNMP packet size
> queue-length Message queue length for each TRAP host
> system-shutdown Enable use of the SNMP reload command
> tftp-server-list Limit TFTP servers used via SNMP
> trap SNMP trap options
> trap-source Assign an interface for the source address of all
traps
> trap-timeout Set timeout for TRAP message retransmissions
> user Define a user who can access the SNMP engine
> view Define an SNMPv2 MIB view
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:45 GMT-3