From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Tue Jun 15 2004 - 10:50:32 GMT-3
But do never assume that a MAC is given in canonical or non-canonical
format. If it is not explicitly wirtten, do ask the proctor. Like in ISIS,
where we are given the NET number, do ask if it is decimal or HEX,
--Richard
-----Original Message-----
From: Geert Nijs [mailto:geert.nijs@simac.be]
Sent: martes, 15 de junio de 2004 15:40
To: Peng Zheng; ccielab@groupstudy.com
Subject: RE: When Mac conversion is required?
Everything in DLSw is in Token Ring format (history). So when using ethernet
mac addresses in DLSw always convert them to Token Ring format.
Regards,
Geert
-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Peng Zheng
Verzonden: dinsdag 15 juni 2004 7:01
Aan: ccielab@groupstudy.com
Onderwerp: When Mac conversion is required?
Hi,
For dlsw config with only Ethernet, when should I
convert the cannonical to non-cannonical address?
Do I need to convert in
dlsw icanreach max-address
and
dmac-output-list?
Thanks.
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
############################################################################
#########
This e-mail and any attached files are confidential and may be legally
privileged.
If you are not the addressee, any disclosure, reproduction, copying,
distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac
immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and
complete
transmission of the information, nor for any delay or interruption of the
transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac
employees
are deemed to be professional in nature. Accordingly, the sender or
recipient of
these messages agrees that they may be read by other Simac employees than
the official
recipient or sender in order to ensure the continuity of work-related
activities
and allow supervision thereof.
############################################################################
#########
**********************************************************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it are
confidential and solely for the use of the intended recipient. If you are
not the intended recipient or the person responsible for delivering it to
the intended recipient, be advised that you have received this email in
error and that any dissemination, distribution, copying or use is strictly
prohibited.
If you have received this email in error, or if you are concerned with the
content of this email please e-mail to: e-security.support@vanco.co.uk
The contents of an attachment to this e-mail may contain software viruses
which could damage your own computer system. While the sender has taken
every reasonable precaution to minimise this risk, we cannot accept
liability for any damage which you sustain as a result of software viruses.
You should carry out your own virus checks before opening any attachments to
this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:40 GMT-3