From: Geert Nijs (geert.nijs@simac.be)
Date: Tue Jun 15 2004 - 10:39:39 GMT-3
Everything in DLSw is in Token Ring format (history). So when using
ethernet mac addresses in DLSw always convert them to Token Ring format.
Regards,
Geert
-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Peng
Zheng
Verzonden: dinsdag 15 juni 2004 7:01
Aan: ccielab@groupstudy.com
Onderwerp: When Mac conversion is required?
Hi,
For dlsw config with only Ethernet, when should I
convert the cannonical to non-cannonical address?
Do I need to convert in
dlsw icanreach max-address
and
dmac-output-list?
Thanks.
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:40 GMT-3