From: Ahmed Mustafa (ahmed.mustafa@sbcglobal.net)
Date: Sun May 23 2004 - 18:59:44 GMT-3
To me,
when configuring voice and data vlan for the same port, one must not make
the port access "switchport mode access" since after creating voice vlan the
port automatically becomes the trunk port. I just can't figure it out how
to remove the dynamic feature without manually setting the port to access
mode.
Ahmed
----- Original Message -----
From: "Sam Joseph" <samjoseph747@hotmail.com>
To: <ahmed.mustafa@sbcglobal.net>
Sent: Sunday, May 23, 2004 2:40 PM
Subject: RE: QOS for 3550
> Create a Voice Vlan and Make the port as access port. That way You will
> still get what you need.
>
> Thanks,
>
> ---Sam.
>
>
> >From: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
> >Reply-To: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
> >To: <ccielab@groupstudy.com>
> >Subject: QOS for 3550
> >Date: Sun, 23 May 2004 12:31:15 -0700
> >
> >interface FastEthernet0/11
> > switchport access vlan 5
> > switchport mode dynamic desirable
> > switchport voice vlan dot1p
> > switchport priority extend trust
> > no ip address
> > mls qos trust cos
> > spanning-tree portfast
> >
> >After finishing configuration, I noticed the command, "switchport mode
> >dynamic
> >desirable" is still there, and the only way to get rid of it by setting
> >mode
> >to access or trunk. But it is not recommended since the port is also
> >carrying
> >voice traffic.
> >
> >
> >Any suggestions/
> >
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
> >http://shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
> _________________________________________________________________
> Get 200+ ad-free, high-fidelity stations and LIVE Major League Baseball
> Gameday Audio! http://radio.msn.click-url.com/go/onm00200491ave/direct/01/
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:15 GMT-3