From: Bob Sinclair (bsin@cox.net)
Date: Sun May 23 2004 - 16:56:05 GMT-3
Ahmed,
When configuring voice vlan you will need to configure the port as an
access port. Check out the voice vlan section of the 3550 configuration
guide.
Bob Sinclair
CCIE #10427, CISSP, MCSE
www.netmasterclass.net
----- Original Message -----
From: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, May 23, 2004 3:31 PM
Subject: QOS for 3550
> interface FastEthernet0/11
> switchport access vlan 5
> switchport mode dynamic desirable
> switchport voice vlan dot1p
> switchport priority extend trust
> no ip address
> mls qos trust cos
> spanning-tree portfast
>
> After finishing configuration, I noticed the command, "switchport mode
dynamic
> desirable" is still there, and the only way to get rid of it by setting
mode
> to access or trunk. But it is not recommended since the port is also
carrying
> voice traffic.
>
>
> Any suggestions/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:15 GMT-3