From: Sergio Jimenez Arguedas (sejimenez@its.co.cr)
Date: Sun May 23 2004 - 17:01:00 GMT-3
Hi Richard
Do you have "rotary x" in the line vty x?
Rgds,
Sergio
----- Original Message -----
From: "Richard Dumoulin" <richard.dumoulin@vanco.es>
To: <ccielab@groupstudy.com>
Sent: Sunday, May 23, 2004 12:48 PM
Subject: Telnet to port 3000 !?!?!?
> Hi group, I cannot figure out why thew following is not working: telnet
> 150.1.1.1 3067
>
>
> Rack1R1#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 CTY - - - - - 0 0 0/0
> -
> 65 AUX 9600/9600 - - - - - 0 0 0/0
> -
> 66 VTY - - - - - 0 0 0/0
> -
> 67 VTY - - - - - 0 0 0/0
> -
> 68 VTY - - - - - 0 0 0/0
> -
> 69 VTY - - - - - 0 0 0/0
> -
> 70 VTY - - - - - 0 0 0/0
> -
>
> Line(s) not in async mode -or- with no hardware support:
> 1-64
>
> Rack1R1#telnet 150.1.1.1 3067
> Trying 150.1.1.1, 3067 ...
> % Connection refused by remote host
>
> Rack1R1#
> Rack1R1#
> Rack1R1#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 CTY - - - - - 0 0 0/0
> -
> 65 AUX 9600/9600 - - - - - 0 0 0/0
> -
> 66 VTY - - - - - 0 0 0/0
> -
> 67 VTY - - - - - 0 0 0/0
> -
> 68 VTY - - - - - 0 0 0/0
> -
> 69 VTY - - - - - 0 0 0/0
> -
> 70 VTY - - - - - 0 0 0/0
> -
>
> Line(s) not in async mode -or- with no hardware support:
> 1-64
>
> Rack1R1# sh run int lo 0
> Building configuration...
>
> Current configuration : 63 bytes
> !
> interface Loopback0
> ip address 150.1.1.1 255.255.255.0
> end
>
> Rack1R1#telnet 150.1.1.1 3066
> Trying 150.1.1.1, 3066 ...
> % Connection refused by remote host
>
> Rack1R1#telnet 150.1.1.1 3000
> Trying 150.1.1.1, 3000 ...
> % Connection refused by remote host
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:15 GMT-3