From: Sergio Jimenez Arguedas (sejimenez@its.co.cr)
Date: Fri May 21 2004 - 22:10:28 GMT-3
Hi Group!!!
I have a problem with a VoIP Scenario using RSVP:
TEL-----------R1-e0/0-----------------------------------e0/0-R2--------------
--TEL
R1_Config
interface Ethernet0/0
ip address 129.44.85.1 255.255.255.0
half-duplex
fair-queue 64 256 1
ip rsvp bandwidth 24 24
!
dial-peer voice 2 pots
destination-pattern 5302
port 3/0/1
!
dial-peer voice 3 voip
destination-pattern 5000
session target ipv4:129.44.85.5
req-qos guaranteed-delay
acc-qos guaranteed-delay
R2_Config
interface Ethernet0/0
ip address 129.44.85.5 255.255.255.0
half-duplex
fair-queue 64 256 1
ip rsvp bandwidth 24 24
!
dial-peer voice 1 pots
destination-pattern 5000
port 1/0/0
!
dial-peer voice 3 voip
destination-pattern 5302
session target ipv4:129.44.85.1
req-qos guaranteed-delay
acc-qos guaranteed-delay
Without the RSVP config, I don4t have problems!!!
But, with RSVP I got it:
R2#csim start 5302
csim: called number = 5302, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(55)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Can somebody help me, please?
Just tell me if you some show or debug cmd!!!
Rgds,
Sergio
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:14 GMT-3