Service-Policy Command

From: Ahmed Mustafa (ahmed.mustafa@sbcglobal.net)
Date: Thu May 20 2004 - 02:27:38 GMT-3

• Next message: ali: "RE: wan managent"
• Previous message: ccie: "Re: IPv6?"
• Next in thread: Yasser Abdullah: "RE: Service-Policy Command"
• Maybe reply: Yasser Abdullah: "RE: Service-Policy Command"
• Maybe reply: Brian McGahan: "RE: Service-Policy Command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

When is it necessary to use 'Service-policy output/input' command under
'Map-class Frame-Relay'

To my knowledge, if I have already configured Frame-Relay traffic shapping,
and later task asks for some QOS for Voice or Data traffic, then my
Service-policy command must be defined under 'Map-class Frame-Relay' since one
won't be able to apply the Service-policy command directly on the interface
where FRTS in enabled.

Regards,

Ahmed

• Next message: ali: "RE: wan managent"
• Previous message: ccie: "Re: IPv6?"
• Next in thread: Yasser Abdullah: "RE: Service-Policy Command"
• Maybe reply: Yasser Abdullah: "RE: Service-Policy Command"
• Maybe reply: Brian McGahan: "RE: Service-Policy Command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:14 GMT-3