From: P729 (p729@cox.net)
Date: Fri Apr 16 2004 - 23:31:47 GMT-3
I don't think 'filter url https' is valid syntax, is it? Although 'filter
https 443' should've worked. Are you specifying version 4 in the 'url-server
host' command? Are the https URL's inordinately long?
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Kenneth Wygand" <KWygand@customonline.com>
To: <ccielab@groupstudy.com>
Sent: Friday, April 16, 2004 2:03 PM
Subject: Pix 6.3(3) / Websense 5.1 - flaky?
> I'm running a test environment where I'm trying to get the Pix to forward
all web (http and https) traffic to a Websense 5.1 box. All blocked traffic
(http) comes back with the typical websense "blocked" page, but all https
traffic (allowed or not) comes back with the "page cannot be displayed".
I've tried configuring the pix with both the "filter url https 0 0 0 0" and
"filter https 443 0 0 0 0" command to no avail. Has anyone seen this
before? Any fix? BTW, I'm running Pix version 6.3(3).
>
> Thanks!
> Ken
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:48 GMT-3