From: Tom Young (gitsyoung@yahoo.co.jp)
Date: Wed Apr 14 2004 - 12:44:18 GMT-3
Marvin
Thank you for replying, but I think the file you give me
is not the stack document, it is the cluster setting.
I am configing the Cat2950's stack now, but not
successed. my switch is Cat4950G-48-EI, no problem with
IOS, and memory, Special GBIC and cable is also ok, But
couldn't done the stack, may I need some setting on switch
? How to confirm the stack status?
And who can provide me some document about the stack
config ?
Thanks alot
--- Marvin Greenlee <marvingreenlee@yahoo.com> $B$+$i$N%a(B
$B%C%;!<%8!'(B
> 2950 Clustering
>
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12114ea1/2950scg/swclus.htm
>
> On the non-command switch, you need to configure the
> command switch MAC-address and cluster name
> ****
> cluster commander-address 000d.bbbb.bbbb member 2
> name
> MYCLUSTER
> <non-command switch>
>
> cluster enable MYCLUSTER 1
> <Command Switch>
> ****
> In this example, the command switch is member 1 and
> the non-command switch is member 2.
>
> Or, you can use the CMS interface.
>
> Marvin Greenlee
> Network Learning, Inc.
> www.ccbootcamp.com
>
> --- Tom Young <gitsyoung@yahoo.co.jp> wrote:
> > Hi , group
> >
> > Whould you please give me a config sample
> about
> > Cat2950G-48's stack ? I couldn't found anything
> from
> > cisco.com. And failured for making stack between
> > cat2950s. Really need someone's help.
> >
> > Thanks alot
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - File online by April 15th
> http://taxes.yahoo.com/filing.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:47 GMT-3