From: Kian Wah Lai (kian_wah_lai@az5.net)
Date: Mon Mar 22 2004 - 21:20:00 GMT-3
From what I've seen, I don't think so.. what about the others?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Wes
Smith
Sent: Tuesday, March 23, 2004 6:33 AM
To: Kian Wah Lai
Cc: 'R&S Groupstudy'; ccielab@groupstudy.com
Subject: Re: NAT qn
I wonder if NAT Outside vs inside would work....
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080
133ddd.shtml
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080
094c32.shtml
Kian Wah Lai wrote:
>Yes.
>That solved the problem ;) someone told me that a few minutes after I sent
>the email. Anyway, thanks.
>
>And sorry for the missing subject
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of R&S
>Groupstudy
>Sent: Monday, March 22, 2004 6:15 PM
>To: Kian Wah Lai; 'Kian Wah Lai'; ccielab@groupstudy.com
>Subject: RE:
>
>secondary address on the wan interface of router2?
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Kian Wah Lai
>Sent: 21 March 2004 06:43
>To: 'Kian Wah Lai'; ccielab@groupstudy.com
>Subject: RE:
>
>
>Didn't know they will remove the image. Basically, there is no interface
>using the 170.100.59.0/24 subnet and I have no idea how can I advertise it.
>OSPF summary address or area range won't work, static routes are not
>allowed...
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kian
>Wah Lai
>Sent: Sunday, March 21, 2004 2:16 PM
>To: ccielab@groupstudy.com
>Subject:
>
>Hi,
>
>
>
>I have no idea how to do the 3rd part (no idea how to advertise the route).
>I got this from Cisco ASET lab 3 and attached is the diagram.
>
>
>
>Configure NAT:
>
>. Configure NAT on R2 such that inside hosts leaving VLAN 2 toward the
Frame
>Relay cloud will be given
>
>an outside IP address in the range 170.100.59.2 through 170.100.59.4 with a
>29-bit netmask. Use list
>
>number 20 for this task.
>
>. Make sure that all possible hosts within the VLAN 2 subnet could be
>supported by this NAT
>
>implementation.
>
>. Ensure that the other routers see the VLAN 2 170.100.20.x route as well
as
>the 170.100.59.0/24
>
>network.
>
>. You may not create a loopback interface or a static route to perform any
>NAT tasks.
>
>
>
>Regards,
>Kian Wah Lai
>
>[GroupStudy removed an attachment of type image/jpeg which had a name of
R&S
>Lab Guide3.jpg]
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:44 GMT-3