From: Kenneth Wygand (KWygand@customonline.com)
Date: Mon Mar 15 2004 - 20:14:52 GMT-3
Sergio,
Have you tried clearing your OSPF routing process on all routers?
Can you give us the output of "show ip ospf neighbor" on each router?
You can also "debug ip ospf lsa-generation" while clearing the OSPF routing process and see what LSA's are generated by each router. Then you can "debug ip ospf monitor" (I think) to see what updates are being sent from one router to its neighbors.
Let us know...
Ken
-----Original Message-----
From: nobody@groupstudy.com on behalf of Sergio Jimenez Arguedas
Sent: Mon 3/15/2004 5:41 PM
To: ccielab@groupstudy.com
Cc:
Subject: Fw: REDISTRIBUTE IN OSPF
Sure,
R3_sh run
!
interface Loopback0
ip address 130.10.31.1 255.255.255.224
!
interface Loopback1
ip address 130.10.31.33 255.255.255.224
!
interface Loopback33
ip address 33.33.33.3 255.255.255.0
!
interface Ethernet0/0
ip address 130.10.30.3 255.255.255.0
half-duplex
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
bandwidth 128
ip address 130.10.134.3 255.255.255.0
encapsulation frame-relay
ip ospf priority 0
no arp frame-relay
frame-relay map ip 130.10.134.1 100 broadcast
frame-relay map ip 130.10.134.4 100 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
redistribute connected metric 10 subnets
network 130.10.30.0 0.0.0.255 area 3
network 130.10.134.0 0.0.0.255 area 0
!
R4_sh run
!
!
interface Loopback0
ip address 130.10.41.1 255.255.255.252
!
interface Loopback1
ip address 130.10.41.5 255.255.255.252
!
interface Ethernet0/0
ip address 130.10.40.4 255.255.255.0
half-duplex
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
bandwidth 128
ip address 130.10.134.4 255.255.255.0
encapsulation frame-relay
ip ospf network non-broadcast
ip ospf priority 0
no arp frame-relay
frame-relay map ip 130.10.134.1 110 broadcast
frame-relay map ip 130.10.134.3 110 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
summary-address 130.10.41.0 255.255.255.0
redistribute connected metric 5 subnets route-map LOOPBACKS
network 130.10.40.0 0.0.0.255 area 4
network 130.10.134.0 0.0.0.255 area 0
!
ip classless
ip http server
!
access-list 10 permit 130.10.41.0 0.0.0.3
access-list 10 permit 130.10.41.4 0.0.0.3
route-map LOOPBACKS permit 10
match ip address 10
!
!
!
----- Original Message -----
From: "Kenneth Wygand" <KWygand@customonline.com>
To: "Sergio Jimenez Arguedas" <sejimenez@its.co.cr>;
<ccielab@groupstudy.com>
Sent: Monday, March 15, 2004 4:32 PM
Subject: RE: REDISTRIBUTE IN OSPF
> Sergio,
>
> Seems as if you have a problem with your route-map / access list
configuration. Can you post your configurations for at least these sections
(entire configs would be even better!)
>
> Thanks!
> Ken
>
> -----Original Message-----
> From: nobody@groupstudy.com on behalf of Sergio Jimenez Arguedas
> Sent: Mon 3/15/2004 3:32 PM
> To: ccielab@groupstudy.com
> Cc:
> Subject: REDISTRIBUTE IN OSPF
>
>
>
> Hi Group,
>
>
> I have a big problem with the following scenario:
>
> E0/0: Net in OSPF AREA 4
> |
> |
> R4--s1/0--------------------FR_SW---------------s0/0--R1
> FR_SW
> R3--s1/0--------------------FR_SW
> |
> |
> E0/0: Net in OSPF AREA 3
>
>
> * AREA 0: OSPF Netw: point-to-multipoint //// Subnet: 130.10.134.0/24
> R1, S0/0
> R4, S1/0
> R3, S1/0
>
>
> *Loopbacks in R4:
>
> Lo0: 130.10.41.1/30
> Lo1: 130.10.41.5/30
>
> *Loopbacks in R3
>
> Lo0: 130.10.31.1/27
> Lo1: 130.10.31.33/27
> Lo33: 33.33.33.3/27
>
>
> ****Problem: In both R3/R4 I redistribute connected (Only int loopbacks,
I
> used a route-map to avoid E0/0 to be redistribute), but R1 only received
> Type-5: 33.33.33.0/27.
>
> R1 didn4t receive R3`s/R4`s Lo0, Lo1. However R1 receives Subnets of the
Area
> 3 and Area 4.(130.10.40.0/24&130.10.30.0/24)
>
>
> Could somebody help me?
>
>
> Note: I changed the ospf network type by non-broadcast but the problem
> continue!!!
>
>
>
> Thanks,
>
>
>
> Sergio Jiminez A.
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:30 GMT-3