From: hqchee (hqchee@sina.com)
Date: Wed Mar 17 2004 - 00:37:21 GMT-3
----- Original Message -----
From: "hqchee" <hqchee@sina.com>
To: "Sergio Jimenez Arguedas" <sejimenez@its.co.cr>
Sent: Wednesday, March 17, 2004 11:34 AM
Subject: Re: REDISTRIBUTE IN OSPF
> Hi,
> about ABR /ASBR. on R1. type:show ip ospf 1 border-router:
> you can see R3/R4 are ABR/ASBR,redistribute used only on opsf asbr,so R1 receives Subnets of the
> Area
> > 3 and Area 4.(130.10.40.0/24&130.10.30.0/24) is normal.if you want R1 NOLY receive loopback addr, in router ospf 1 :no netw x.x.x.x area 3 on R3.
>
> ----- Original Message -----
> From: "Sergio Jimenez Arguedas" <sejimenez@its.co.cr>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, March 16, 2004 6:41 AM
> Subject: Fw: REDISTRIBUTE IN OSPF
>
>
> > Sure,
> >
> >
> > R3_sh run
> >
> >
> > !
> > interface Loopback0
> > ip address 130.10.31.1 255.255.255.224
> > !
> > interface Loopback1
> > ip address 130.10.31.33 255.255.255.224
> > !
> > interface Loopback33
> > ip address 33.33.33.3 255.255.255.0
> > !
> > interface Ethernet0/0
> > ip address 130.10.30.3 255.255.255.0
> > half-duplex
> > !
> > interface TokenRing0/0
> > no ip address
> > shutdown
> > ring-speed 16
> > !
> > interface Serial1/0
> > bandwidth 128
> > ip address 130.10.134.3 255.255.255.0
> > encapsulation frame-relay
> > ip ospf priority 0
> > no arp frame-relay
> > frame-relay map ip 130.10.134.1 100 broadcast
> > frame-relay map ip 130.10.134.4 100 broadcast
> > no frame-relay inverse-arp
> > frame-relay lmi-type ansi
> > !
> > interface Serial1/1
> > no ip address
> > shutdown
> > !
> > interface Serial1/2
> > no ip address
> > shutdown
> > !
> > interface Serial1/3
> > no ip address
> > shutdown
> > !
> > router ospf 1
> > log-adjacency-changes
> > redistribute connected metric 10 subnets
> > network 130.10.30.0 0.0.0.255 area 3
> > network 130.10.134.0 0.0.0.255 area 0
> > !
> >
> >
> > R4_sh run
> >
> >
> > !
> > !
> > interface Loopback0
> > ip address 130.10.41.1 255.255.255.252
> > !
> > interface Loopback1
> > ip address 130.10.41.5 255.255.255.252
> > !
> > interface Ethernet0/0
> > ip address 130.10.40.4 255.255.255.0
> > half-duplex
> > !
> > interface TokenRing0/0
> > no ip address
> > shutdown
> > ring-speed 16
> > !
> > interface Serial1/0
> > bandwidth 128
> > ip address 130.10.134.4 255.255.255.0
> > encapsulation frame-relay
> > ip ospf network non-broadcast
> > ip ospf priority 0
> > no arp frame-relay
> > frame-relay map ip 130.10.134.1 110 broadcast
> > frame-relay map ip 130.10.134.3 110 broadcast
> > no frame-relay inverse-arp
> > frame-relay lmi-type ansi
> > !
> > interface Serial1/1
> > no ip address
> > shutdown
> > !
> > interface Serial1/2
> > no ip address
> > shutdown
> > !
> > interface Serial1/3
> > no ip address
> > shutdown
> > !
> > router ospf 1
> > log-adjacency-changes
> > summary-address 130.10.41.0 255.255.255.0
> > redistribute connected metric 5 subnets route-map LOOPBACKS
> > network 130.10.40.0 0.0.0.255 area 4
> > network 130.10.134.0 0.0.0.255 area 0
> > !
> > ip classless
> > ip http server
> > !
> > access-list 10 permit 130.10.41.0 0.0.0.3
> > access-list 10 permit 130.10.41.4 0.0.0.3
> > route-map LOOPBACKS permit 10
> > match ip address 10
> > !
> > !
> > !
> >
> >
> >
> >
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Kenneth Wygand" <KWygand@customonline.com>
> > To: "Sergio Jimenez Arguedas" <sejimenez@its.co.cr>;
> > <ccielab@groupstudy.com>
> > Sent: Monday, March 15, 2004 4:32 PM
> > Subject: RE: REDISTRIBUTE IN OSPF
> >
> >
> > > Sergio,
> > >
> > > Seems as if you have a problem with your route-map / access list
> > configuration. Can you post your configurations for at least these sections
> > (entire configs would be even better!)
> > >
> > > Thanks!
> > > Ken
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com on behalf of Sergio Jimenez Arguedas
> > > Sent: Mon 3/15/2004 3:32 PM
> > > To: ccielab@groupstudy.com
> > > Cc:
> > > Subject: REDISTRIBUTE IN OSPF
> > >
> > >
> > >
> > > Hi Group,
> > >
> > >
> > > I have a big problem with the following scenario:
> > >
> > > E0/0: Net in OSPF AREA 4
> > > |
> > > |
> > > R4--s1/0--------------------FR_SW---------------s0/0--R1
> > > FR_SW
> > > R3--s1/0--------------------FR_SW
> > > |
> > > |
> > > E0/0: Net in OSPF AREA 3
> > >
> > >
> > > * AREA 0: OSPF Netw: point-to-multipoint //// Subnet: 130.10.134.0/24
> > > R1, S0/0
> > > R4, S1/0
> > > R3, S1/0
> > >
> > >
> > > *Loopbacks in R4:
> > >
> > > Lo0: 130.10.41.1/30
> > > Lo1: 130.10.41.5/30
> > >
> > > *Loopbacks in R3
> > >
> > > Lo0: 130.10.31.1/27
> > > Lo1: 130.10.31.33/27
> > > Lo33: 33.33.33.3/27
> > >
> > >
> > > ****Problem: In both R3/R4 I redistribute connected (Only int loopbacks,
> > I
> > > used a route-map to avoid E0/0 to be redistribute), but R1 only received
> > > Type-5: 33.33.33.0/27.
> > >
> > > R1 didn4t receive R3`s/R4`s Lo0, Lo1. However R1 receives Subnets of the
> > Area
> > > 3 and Area 4.(130.10.40.0/24&130.10.30.0/24)
> > >
> > >
> > > Could somebody help me?
> > >
> > >
> > > Note: I changed the ospf network type by non-broadcast but the problem
> > > continue!!!
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > >
> > > Sergio Jiminez A.
> > >
> > > _______________________________________________________________________
> > > Please help support GroupStudy by purchasing your study materials from:
> > > http://shop.groupstudy.com
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:32 GMT-3