From: Sergio Jimenez Arguedas (sejimenez@its.co.cr)
Date: Mon Mar 15 2004 - 19:41:53 GMT-3
Sure,
R3_sh run
!
interface Loopback0
ip address 130.10.31.1 255.255.255.224
!
interface Loopback1
ip address 130.10.31.33 255.255.255.224
!
interface Loopback33
ip address 33.33.33.3 255.255.255.0
!
interface Ethernet0/0
ip address 130.10.30.3 255.255.255.0
half-duplex
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
bandwidth 128
ip address 130.10.134.3 255.255.255.0
encapsulation frame-relay
ip ospf priority 0
no arp frame-relay
frame-relay map ip 130.10.134.1 100 broadcast
frame-relay map ip 130.10.134.4 100 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
redistribute connected metric 10 subnets
network 130.10.30.0 0.0.0.255 area 3
network 130.10.134.0 0.0.0.255 area 0
!
R4_sh run
!
!
interface Loopback0
ip address 130.10.41.1 255.255.255.252
!
interface Loopback1
ip address 130.10.41.5 255.255.255.252
!
interface Ethernet0/0
ip address 130.10.40.4 255.255.255.0
half-duplex
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
!
interface Serial1/0
bandwidth 128
ip address 130.10.134.4 255.255.255.0
encapsulation frame-relay
ip ospf network non-broadcast
ip ospf priority 0
no arp frame-relay
frame-relay map ip 130.10.134.1 110 broadcast
frame-relay map ip 130.10.134.3 110 broadcast
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
interface Serial1/1
no ip address
shutdown
!
interface Serial1/2
no ip address
shutdown
!
interface Serial1/3
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
summary-address 130.10.41.0 255.255.255.0
redistribute connected metric 5 subnets route-map LOOPBACKS
network 130.10.40.0 0.0.0.255 area 4
network 130.10.134.0 0.0.0.255 area 0
!
ip classless
ip http server
!
access-list 10 permit 130.10.41.0 0.0.0.3
access-list 10 permit 130.10.41.4 0.0.0.3
route-map LOOPBACKS permit 10
match ip address 10
!
!
!
----- Original Message -----
From: "Kenneth Wygand" <KWygand@customonline.com>
To: "Sergio Jimenez Arguedas" <sejimenez@its.co.cr>;
<ccielab@groupstudy.com>
Sent: Monday, March 15, 2004 4:32 PM
Subject: RE: REDISTRIBUTE IN OSPF
> Sergio,
>
> Seems as if you have a problem with your route-map / access list
configuration. Can you post your configurations for at least these sections
(entire configs would be even better!)
>
> Thanks!
> Ken
>
> -----Original Message-----
> From: nobody@groupstudy.com on behalf of Sergio Jimenez Arguedas
> Sent: Mon 3/15/2004 3:32 PM
> To: ccielab@groupstudy.com
> Cc:
> Subject: REDISTRIBUTE IN OSPF
>
>
>
> Hi Group,
>
>
> I have a big problem with the following scenario:
>
> E0/0: Net in OSPF AREA 4
> |
> |
> R4--s1/0--------------------FR_SW---------------s0/0--R1
> FR_SW
> R3--s1/0--------------------FR_SW
> |
> |
> E0/0: Net in OSPF AREA 3
>
>
> * AREA 0: OSPF Netw: point-to-multipoint //// Subnet: 130.10.134.0/24
> R1, S0/0
> R4, S1/0
> R3, S1/0
>
>
> *Loopbacks in R4:
>
> Lo0: 130.10.41.1/30
> Lo1: 130.10.41.5/30
>
> *Loopbacks in R3
>
> Lo0: 130.10.31.1/27
> Lo1: 130.10.31.33/27
> Lo33: 33.33.33.3/27
>
>
> ****Problem: In both R3/R4 I redistribute connected (Only int loopbacks,
I
> used a route-map to avoid E0/0 to be redistribute), but R1 only received
> Type-5: 33.33.33.0/27.
>
> R1 didn4t receive R3`s/R4`s Lo0, Lo1. However R1 receives Subnets of the
Area
> 3 and Area 4.(130.10.40.0/24&130.10.30.0/24)
>
>
> Could somebody help me?
>
>
> Note: I changed the ospf network type by non-broadcast but the problem
> continue!!!
>
>
>
> Thanks,
>
>
>
> Sergio Jiminez A.
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:30 GMT-3