From: Kenneth Wygand (KWygand@customonline.com)
Date: Mon Mar 15 2004 - 19:32:52 GMT-3
Sergio,
Seems as if you have a problem with your route-map / access list configuration. Can you post your configurations for at least these sections (entire configs would be even better!)
Thanks!
Ken
-----Original Message-----
From: nobody@groupstudy.com on behalf of Sergio Jimenez Arguedas
Sent: Mon 3/15/2004 3:32 PM
To: ccielab@groupstudy.com
Cc:
Subject: REDISTRIBUTE IN OSPF
Hi Group,
I have a big problem with the following scenario:
E0/0: Net in OSPF AREA 4
|
|
R4--s1/0--------------------FR_SW---------------s0/0--R1
FR_SW
R3--s1/0--------------------FR_SW
|
|
E0/0: Net in OSPF AREA 3
* AREA 0: OSPF Netw: point-to-multipoint //// Subnet: 130.10.134.0/24
R1, S0/0
R4, S1/0
R3, S1/0
*Loopbacks in R4:
Lo0: 130.10.41.1/30
Lo1: 130.10.41.5/30
*Loopbacks in R3
Lo0: 130.10.31.1/27
Lo1: 130.10.31.33/27
Lo33: 33.33.33.3/27
****Problem: In both R3/R4 I redistribute connected (Only int loopbacks, I
used a route-map to avoid E0/0 to be redistribute), but R1 only received
Type-5: 33.33.33.0/27.
R1 didn4t receive R3`s/R4`s Lo0, Lo1. However R1 receives Subnets of the Area
3 and Area 4.(130.10.40.0/24&130.10.30.0/24)
Could somebody help me?
Note: I changed the ospf network type by non-broadcast but the problem
continue!!!
Thanks,
Sergio Jiminez A.
_______________________________________________________________________
Please help support GroupStudy by purchasing your study materials from:
http://shop.groupstudy.com
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Apr 01 2004 - 08:15:30 GMT-3